What are the ways of sterilizing biocides?
As we all know, biocides is a broadly used sewage treatment representative, which has a large demand on the market, and can also be known by consumers with its secure functionality and no contamination. But you understand What are the ways of sterilizing biocides? We can open the medicinal hot water before placing biocide in oil and gas，DBNPA the biocides. Pay attention to the water temperature, normally approximately 60 degrees, more than 70 degrees, otherwise it will affect the activity of the biocides, and then filter Can be used, if it is delivered, it may be added at a single time, or it can be added once a change, and it can be placed at a predetermined point;
2.
Use the treated funnel to place itThis approach is comparatively straightforward and relatively straightforward. We could put the appropriate amount of bactericidal algicide into the funnel and right put the medicine to the boiler at a certain rate;
3.
If there's a water tank with algaecide in the boiler, there is no economizer. In this manner, we could immediately put the medicine into the water tank, along with the medicine can be directly delivered to the furnace together with the water distribution system to achieve the results of sterilization and algae elimination; 4. Standard delivery, the sewage discharge speed of this method is approximately 7 percent, but to ensure that there is one discharge per shift, the time is controlled at roughly 50s. Note that if there is no water level change after the sewage treatment, it is necessary to check if the furnace is blocked. .
Evaluation of the Primary functional consequences of biocides
Together with the development of society, people's living standards have experienced significant changes. The ecological environment where we live has also undergone earth-shaking changes. The dirt was destroyed and the water quality has become complicated. In the development of industry and biology, a high number of chemical agents have been employed, which makes the various chemical components in the water surplus, creating a fantastic environment for the development of fungi and algae in the atmosphere, which impacts its further improvement. So how can we solve these algae and fungi?
At this moment, it is our turn to use our biocides. The biocides is a non-oxidizing bactericide. The look is colorless or light yellow liquid liquid. Why can it be bactericidal and algae-killing? That is because the biocides itself comprises active chlorine, monoatomic oxy-hydroxyl bands and a few polymers, which can effectively curb the formation of this expanding environment and remove the nutrients required for parasites and algae growth. Ingredients to achieve the results of sterilization and algae elimination.
From the production process, other sterilizing agents are periodically used in combination with additional water treatment agents to restrain the standard operation of the circulating water system in the water treatment system. Since the bactericidal treatment agent is a chemical, we should take protective steps when using it. After use, it should be sealed in a plastic bucket and set in a cool, ventilated and dry place inside.
Our company is a manufacturer of bactericidal treatment agents, with research group, good product quality and higher credibility. If you want a deep understanding of our products, you can consult the official website.